Focus Area:
Industrial Pumps
Table: Industrial Pump Specifications
| Image | Pump Type | Description & Application | Typical Flow Range |
|---|---|---|---|
 | Centrifugal (SingleStage) | General purpose water transfer, process pumping. Simple design | 5 - 5,000 m³/h |
 | Centrifugal (Multistage) | High-pressure applications. Multiple impellers on a single shaft. | 1 - 500 m³/h |
 | Submersible (Slurry) | Designed to operate fully submerged in sumps. Handles abrasive solids. | 10 - 2,000 m³/h |
 | Submersible (Dewatering) | For pumping clean or dirty water. Not for heavy abrasives. | 5 - 1,000 m³/h |
 | Horizontal Spindle | Long shaft allowing placement away from the sump. | 10 - 4,000 m³/h |
 | Vertical Spindle (VSX) | Cantilever design for sump pumping with no submerged bearings. | 10 - 2,500 m³/h |
 | Diaphragm (AODD) | Air-operated. Positive displacement. Can run dry. Handles viscous fluids and solids | 1 - 200 m³/h |
 | Gear Pump | Positive displacement. Provides a constant flow. For high-viscosity fluids. | 0.1 - 400 m³/h |
Key Compliance & Certifications:
| Item | Description |
|---|---|
| Design & Manufacture | ISO 5199 (Technical specifications for centrifugal pumps), ASME B73.1, ISO 2858. |
| Performance Testing | Hydrostatic test per ISO 9905. Performance acceptance tests per ISO 9906 Grade 2B. |
| Dynamic Balancing | ISO 1940 G6.3 standard or better |
| Quality Management | ISO 9001:2015. |
| Materials | ASTM / SANS specifications for metallurgy; abrasion-resistant materials (A49, Ni-Hard) are standard for slurry applications. |